Power-on mode / system hardware protection

Power on Mode power supply boot mode can flexibly set the power on/off status

Providing customers with a choice of power supply modes, ATX supports software on/off, allowing the operating system to control the final ''off'' signal to the power supply; giving the operating system time to use dedicated output signals, saving all information before powering down And complete important tasks. It can also support low power mode and continue to power backup devices.

Power-on mode:

AT mode (no standby voltage after shutdown), power on mode
ATX- S5 mode (standard ATX mode), press the power button switch mode
Delayed power on or off in Ignition Mode - AT mode

Remote switch support:
Connect the internal industrial computer switch to an external device to switch the industrial computer from the outside.

Ignition (delay) switch support:
The AIC software can be used to set the delayed on/off time, or you can enter a custom value (mostly for car use).

System hardware and ground isolation protection
Soft and hard fit, double protection, product use is more reliable!

Providing customers with a scientific and rational use of a surge protector for a protected system, it is possible to make all devices in the system equipped with a surge protector achieve voltage equalization or mutual equipotential at the moment of lightning and surge shock, thereby Avoid harmful transient potential differences in the system to ensure safe operation of the entire system.

Provide customers with isolation protection and eliminate interference caused by ground potential difference, in order to stabilize the line and improve the reliability of the system.